We decided to shoot some demo footage from the air with our 4.4mm Low Distortion M12 lens using our new Phantom2 with Zenmuse H4-3D. This footage was shot in medium mode at 2.7K/30. We also used our new in-camera ND filters for the Hero4 – a 0.9 density filter was used in this case. A pack of […]

> View article

The following image gallery highlights some of the main changes in the new Hero4 cameras. Check back for updates!    

> View article

    Now that we’re deep into our new round of development on the latest Ribcage Mod, we thought we’d share our experience so far starting with the Hero4 Silver. We’ve pulled it apart so you can see what’s new. It appears to be very similar to the Hero3+ Black with the same sensor and […]

> View article

  For the month of October Get our 3.6mm 3MP Low Distortion M12 lens for only $45USD. This is a sharp wide angle lens with absolutely no fisheye.  The optics of the lens correct the barrel distortion for perfectly straight lines at any angle. Don’t forget to watch the sample video in HD!   While supplies last! BUY […]

> View article

Here at Back-Bone we do a lot of inspection work on our electronic components and fabricated parts, so we put together a high magnification solution using our own modified GoPro cameras and high magnification C-Mount lenses. With ability to output at 1080p to a large screen it makes even the tiniest details easy to see […]

> View article

GoPro probably didn’t have this in mind when they designed the Hero3+ ! We finally had a chance to test out the Ribcage on our Telescope. These images and the video below were taken by attaching a c-mount to 1.25″ nosepiece adapter to our Celestron C6 750mm Newtonian Reflector telescope. No lens was used on […]

> View article