Sample footage from our new Ribcage Modified YI 4K camera. Available as a do-it-yourself kit or a fully modified camera. It allows you to connect small M12 (S-Mount) lenses as well as Entaniya VR and C-Mount lenses. Connect your other favorite lens types with optional adapters.
Lenses Used:
– 5.4mm 10MP M12
– 3.8mm 16MP M12
– 2/3″ 9mm C-Mount
– 1/2″ 8-80mm C-Mount
music: www.bensound.com
Superior power and versatility for a great price. The Yi 4K camera’s small size, light weight and astonishing shooting options make it a pocket sized powerhouse. Modify it with our interchangeable lens kit and it becomes extraordinary! It features native M12 (S-Mount) and C-Mount compatibility as well as compatibility with some CS-Mount lenses**. Almost any popular lens type can be attached with optional adapters including Canon, Nikon, Pentax and more! Take advantage of what professional lenses have to offer: manual focus control, a more cinematic depth of field, macro shooting, optical zoom and iris control. There’s a built in tripod mount so you can connect your camera to professional mounts and supports. Want night vision? Just take out the IR-cut filter so you can see in the dark with any IR light source!
Designed for developers with special applications, our Modulus Sensor Housing provides protection and infinite lens mounting options for the GoPro Hero4 image sensor when removed from the camera. Use the included 12” sensor extension ribbon to place the image sensor away from the camera body. The sensor housing can be mounted on any standard 1/4”- 20 mounting point using the included mounting bracket. Two back plates are provided for maximum flexibility – with two sensor housings you can use alternate back plates to mount them directly back-to-back for the smallest amount of parallax possible. Sensors can also be mounted back-to-back with an offset of 90°: one sensor in landscape and the other in portrait orientation. This allows high frame rate shooting in 16:9 modes without losing the ability to stitch a full 4K resolution* 360° video with only two cameras. The module can be configured so that the ribbon connector comes out the back, top, bottom or right/left side. Bundle this housing with a Ribcage Mod Kit for maximum usability!
What you will need:
1. Ribcage Air modified Hero4
2. Modulus sensor housing
3. Custom cut filters (optional)
Features:
1. Compatible with GoPro Hero4 (Camera must be disassembled)
2. 12” extension ribbon separates image sensor from camera
3. Ribbon can be configured to come out the back, top, bottom, left or right of the housing
4. Tripod mount included
5. Compatible with M12 (S-Mount), CS and C-Mount lenses and more with adapters
6. Precision CNC machined aluminum parts
Designed with maximum flexibility in mind, our new aluminum Ribcage 3x mount will give you lots of options for your 360° spherical videos at a much lower cost. Ribcage Modified Hero4 cameras can be mounted in either vertical or horizontal orientation. When in vertical configuration (cameras on their sides) you can take advantage of all the shooting modes the cameras have to offer to achieve near 6K/30 or full 4K/60*. In addition, when in vertical configuration the battery compartment and all the buttons are easily accessible including the side button. The Ribcage 3x mounting bracket also supports our Modulus Sensor Housing which can be connected directly. The camera mounting plates can be connected to put the cameras in horizontal configuration, or they can be turned over so the camera bodies hang underneath when Modulus Sensor Housings are connected via our extended jumper. Stock (unmodified) GoPro Hero4 cameras can also be used** (vertical configuration only). The mount is compatible with both 1/4” – 20 and 3/8” – 16 tripod mounts.
Sample footage taken with our Ribcage 3X VR Mount. This mount is capable of holding three Ribcage Modified Hero4 cameras in either portrait or landscape orientations. When in portrait (sideways) orientation all the shooting modes on the camera can be used while still getting full spherical coverage. That means you can take advantage of the added resolution of 4K or increased frame rates. In addition the battery door, the ports and all buttons are easily accessible when in portrait configuration.
This footage was shot in 2.7K/60 which produces a stitched output greater than 4K. Shooting on 4K/30 will produce a stitched output of about 5800×2900. In this case the video was output at 4096 x 2048 @ 60fps
This video features lots of great shots from the air with our Modified Hero4 Black cameras mounted on a 3DR Solo drone. The gimbals are balanced with our Dead Weight kit for Solo. Most handheld shots were performed with an Orbit Pole + a Z1 Rider 3-Axis Gimbal.
Shot in Elliston, Maberly and Brigus Newfoundland, Canada
We’ve brought this setup out to lots of trade shows and some of you have been asking to see a little footage from it. We put this quick video together featuring some Osprey that live nearby to our office.
3 x Ribcage AIR modified Hero4 Black
5.4mm M12 Lens
8-80mm C-Mount Varifocal Lens
500mm Sigma Telephoto Lens
Canon EF to C-Mount adapter (with iris)
Feiyu-Tech WG 3-axis Gimbal
Orbit Pole
Marshal 5″ Field monitor
Music: www.bensound.com
We’ve developed a series of mounts specifically for Ribcage Modified Hero4 cameras that allow one camera to be placed vertically (Entaniya 280), 2 cameras back-to-back or 3 cameras together in either vertical or horizontal configurations. These are perfect for capturing complete 360 degree videos with Entaniya or other super wide angle lenses.
This sample footage was taken with our Ribcage 3X VR Mount. This mount is capable of holding three Ribcage Modified Hero4 cameras in either portrait or landscape orientations. When in portrait (sideways) orientation all the shooting modes on the camera can be used while still getting full spherical coverage. That means you can take advantage of the added resolution of 4K or increased frame rates. In addition the battery door, the ports and all buttons are easily accessible when in portrait configuration.
This footage was shot in 2.7K/60 which produces a stitched output greater than 4K. Shooting on 4K/30 will produce a stitched output of about 5800×2900. In this case the video was output at 4096 x 2048 @ 60fps
Ribcage 3X Mount:
https://www.back-bone.ca/product/ribcage-3x-mount/
Lenses used:
https://www.back-bone.ca/product/1-45mm-12mp-ir-fisheye/
Special Deals
Legacy Products
Limited Time Offers
Open Box
Modified Cameras and DIY Mod Kits
Cameras
Mod Kits
Installation Services
Lenses
CS-Mount & C-Mount
M12
Insta360 ONE R 1-Inch / Ribcage RX0 II
IR Corrected
Entaniya
Adapters
Accessories
Filters
Sony
GoPro
Replacement Parts
