Important: RIBCAGE RX0 II is not waterproof. The MFT mount is designed for manual lenses only.
Put your own glass on the amazing Sony RX0 II with our Ribcage interchangeable lens mod. This fully modified RX0 II camera comes configured with a passive micro four thirds (MFT) mount* and can be re-configured to C-Mount at any time with the included mounting ring. With this mount combination you can attach almost any lens, or use your camera with imaging equipment such as microscopes and telescopes. Use your SLR lenses with an optional adapter, or use some great vintage cinema lenses for a unique look.
If desired, the removable IR-cut filter allows you to capture footage in the wavelength of your choice for custom imaging and scientific applications. Control up to 5 cameras at once via WiFi and Bluetooth (Android/iOS/PC). Pair each camera with the new Sony CCB-WD1 Wired Control Box and create massive VR or bullet time arrays of up to 100 cameras with frame-by-frame sync accuracy!
In addition our premium aluminum components help keep the camera cool for extended shooting!
- MFT Mount* & C-Mount
- Tripod mount with both 1/4-20 & 3/8-16 UNC threads
- *New* Internal 4K/30 recording
- *New* Electronic Image Stabilization
- *New* Flip-out rear LCD display
- Improved cooling for extended shooting
- Removable IR-Cut filter for custom imaging applications
- 1” (1.0-Type) stacked Exmor RS CMOS sensor with DRAM Chip
- Clean 4K UHD HDMI out for uncompressed external recording
- 1080p 24/25/30/50/60 720p/120 XAVC S; AVCHD format Ver.2.0 compatible; MP4
- Ultra slow motion up to 1000 fps
- Up to 1/32000 sec. Anti-Distortion Shutter
- Wireless or Wired multi camera control for multi-view applications
- Wifi camera control (Android / iOS)
- Control up to 5 cameras via smartphone
*The MFT mount does not supply power to the lens. This mount is designed for manual lenses only. If using C-mount we recommend 1″ or 1.1″ format lenses.
- 1 x Modified RX0 II camera with MFT mount
- 1 x C-Mount ring for alternate configuration
- 1 x Tripod mounting plate with both 1/4-20 and 3/8-16 threads
- 1 x Charging cable (Micro USB) and wall plug
- 1 x Replacement IR-Cut filter
- 1 x Custom Back-Bone GOcase with divider system
- 1 x Memory card protector bracket
- 1 x Wrist Strap
- 1 x NP-BJ1 Battery